1413 µS/cm Conductivity Calibration Solution (500ml)

1413 µS/cm Conductivity Calibration Solution (500ml)

Brand Chemical Supplies provides high-precision 1413 µS/cm (microsiemens) calibration standard, the international industry benchmark for calibrating conductivity meters and TDS sensors. This solution is specifically formulated to ensure the accuracy of instruments used in water treatment, environmental monitoring, and industrial process control.

Technical Specifications

Key Features & Benefits

• NIST Traceable: Our solutions are manufactured against NIST (National Institute of Standards and Technology) traceable weights and reference materials, ensuring your compliance with ISO and laboratory audit requirements.

• Temperature Compensation Table: Every bottle features a printed chart showing the precise conductivity values at different temperatures (from 5°C to 35°C). This is critical for manual calibration if your meter does not have Automatic Temperature Compensation (ATC).

• Air-Tight Sealing: The 500 mL$ bottles are fitted with an induction-sealed cap to prevent evaporation and carbon dioxide absorption, which can alter the conductivity value over time.

• Ready-to-Use: No dilution or mixing is required. The solution is stabilized to provide a long shelf life and consistent performance in both laboratory and field environments.

Primary Applications

• General Water Testing: Calibrating handheld meters for testing tap water, river water, and borehole quality.

• Hydroponics & Agriculture: Setting the baseline for EC (Electrical Conductivity) meters used in nutrient management.

• Cooling Towers: Calibrating controllers that manage the concentration of dissolved solids.

• Laboratory QC: Providing a reliable standard for daily instrument verification.

Calibration Best Practices

1. Preparation: Pour a small amount of the solution into a clean, dry beaker. Never dip your sensor directly into the original 500 mL bottle, as this will contaminate the entire supply.

2. Rinsing: Rinse the conductivity probe with deionized water and blot dry before placing it in the calibration solution.

3. Stabilization: Allow the probe to sit in the solution for at least 1 \sim 2 minutes to reach temperature equilibrium before adjusting the meter.

4. Disposal: Always discard the used portion of the solution. Do not pour it back into the bottle.

Contact our laboratory supplies team at Brand Chemical Supplies today to secure your 1413 µS/cm Calibration Solutions and maintain the highest level of accuracy in your water analysis.